Union Community VIRDI 3000 Podręcznik Użytkownika Pobierz pdf (Strona 52)

AC-2100 User Guide 52

UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu

Seoul, Korea (138-050)

Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :[email protected]

http://www.unioncomm.co.kr

If this menu is set to ‘1.Enable’, a checking is performed during the registration

process to determine whether a new fingerprint is already registered. This

prevents the same fingerprint from being registered again as a new user ID.

After selecting a setting value, press [ENT] button to continue setting.

3.8.4. Wiegand Output Setting

◆ At default screen [F2~] Æ [6.Device] Æ [4.Wiegand] ◆

0.None

1.26bit

2.34bit

3.Custom

Default setting: ‘0’

This function is used only in case that an additional controller operated by

Wiegand input is installed. After authentication is completed, the data in the

following types are sent to the Wiegand port of the terminal.

0.None

This is a general case and Wiegand out port is not used.

1.26bit

As “Sitecode[1byte] + User ID[2bytes]” is sent, the user ID is set

using less than 4 digits.

Transmission example) For SiteCode:045, UID:6543

Æ 1 00101101 0001 1001 10001111 0

2.34bit

As “Sitecode[1byte] + User ID[3bytes]” is sent, the user ID is set

using less than 7 digits.

However, if the user ID consists of 8 digits, Sitecode is ignored

and only “User ID[4bytes] is sent.

Transmission example) SiteCode:001, UID:123456

Æ 0 00000001 00000001 11100010 01000000 0

3.Custom As a setting made through user definition, this setting can be set

only at the server. You can only check it at the terminal.

※ It has nothing to do with the use of a Wiegand type card reader. If it is set to

‘1’ or ‘2’, the following site code value is set.

(0-255):000

Default setting: ‘000’

This option can be used when the above Wiegand out is set to ‘1’ or ‘2’. Enter a

designated value between 0~255 in a site code to send to the Wiegand port

along with a user ID.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58 59

Brak uwag

Union Community VIRDI 3000 Podręcznik Użytkownika Strona 52